BJTMR - R247 THINNER
- MSDS: BJTMR
- Manufacturer: T J RONAN PAINT CORP
- Product Name: R247 THINNER
- National Stock Number: 6850-00F014066
Product Identification
Product ID:R247 THINNER
MSDS Date:04/25/1986
FSC:6850
NIIN:00F014066
MSDS Number: BJTMR
Responsible Party
BRONX, NY 10454
Emergency Phone: (212) 292-1100
Info Phone: (212) 292-1100
Cage: FO720
Contractor
Telephone: (212) 292-1100
Cage: FO720
Ingredients
MINERAL SPIRITS, PETROLEUM SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, GIDDINESS,
NARCOSIS, CENTRAL NERVOUS SYSTEM DEPRESSION, KIDNEY, LIVER, & OTHER
SYSTEMIC DAMAGE, AFFECT HIGHER BRAIN FUNCTIONS & MENTAL CAPACITY.
SKIN: REDNESS OR SWELLING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, GIDDINESS, NARCOSIS,
CENTRAL NERVOUS SYSTEM DEPRESSION, KIDNEY, LIVER, & OTHER SYSTEMIC
DAMAGE, AFFECT HIGH BRAIN FUNCTIONS & MENTAL CAPACITY. SKIN:
REDNESS OR SWELLING.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. IF NOT BREATHING, RESTORE
BREATHING. INGESTION: DON'T INDUCE VOMITING. EYE: FLUSH W/LARGE
QUANTITIES OF WATER FOR 15 MINS. SKIN: REMOVE EXCESS MATERIAL
W/PAPER TOWELS OR RAGS. WASH W/MILD SOAP & WARM WATER.OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:107F
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS. WATER
MAY BE UNSUITABLE AS EXTINGUISHING MEDIA, BUT HELPFUL IN KEEPING
ADJACENT CONTAINERS COOL.
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES & KEEP AWAY FROM HEAT, SPARKS & OPEN FLAMES.
Accidental Release
Spill Release Procedures:ELIMINATE ALL HEAT SOURCES, OPEN FLAMES, &
OTHER SOURCES OF IGNITION. ABSORBENT W/SOLID ABSORBENT. SHOVEL INTO
CONTAINERS. IF LARGE QUANTITIES ARE SPILLED PERSONAL PROTECTIVE
EQUIPMENT MAY BE REQUIRED .
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. KEEP PRODUCT CONTAINERS COOL, DRY & AWAY FROM SOURCES OF
IGNITION. AVOID INHALATION OF VAPORS.
Other Precautions:USE W/ADEQUATE VENTILATION. AVOID CONTACT W/SKIN.
Exposure Controls
Respiratory Protection:DEPENDS ON VAPOR CONCENTRATION >TLV. USE NIOSH
RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST: PREFERRED-PAINT SPRAY BOOTH.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SPLASH GOGGLES, FACE SHIELD
Other Protective Equipment:NONE
Work Hygienic Practices:WASH SKIN AFTER CONTACT, BEFORE BREAKS & MEALS
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:282-388F
Vapor Pres:3.0-6.6
Vapor Density:3.8-4.9
Spec Gravity:0.779-0.87
Evaporation Rate & Reference:(BU AC = 1): 0.1-0.6
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR W/MILD ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS OR BASES & SELECTED AMINES
Stability Condition to Avoid:HEAT, HOT METAL SURFACES, SPARKS & OPEN
FLAMES.
Hazardous Decomposition Products:COBALT COMPOUNDS, CO2, CO
Disposal
Waste Disposal Methods:DISPOSE AS PAINT WASTE IN ACCORDANCE W/FEDERAL,
STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.